Reset Command; Reset; Set Command - 3Com OfficeConnect 3C100XF Cli User's Manual

3-12 C 3: A
HAPTER DMINISTRATIVE

Reset Command

reset

Set Command

set reset_action
<default_configuration
none>
CLI C
OMMANDS
Reset
Set
Show
Use the reset command to restore the following OfficeConnect Gateway settings
to their factory default configuration values.
configuration
DHCP_client_network
DHCP_server_settings
DHCP_server_counters
DHCP_proxy_counters
pppoe counters
The following table describes these settings.
Parameters
configuration
DHCP_client_network
DHCP_server_settings
DHCP_proxy_counters
pppoe counters
Also see the set bulk_file <file_name> command.
The set reset_action <default_configuration | none> command lets you disable
the ability to manually restore factory default settings by pressing and holding the
|
reset button, combined with a power cycle.
CAUTION: We recommend that you not use this command unless you are an
expert user. Using this command and disabling the manual restore will result in an
unusable OfficeConnect Gateway unit.
reset configuration
reset DHCP_client_network
reset DHCP_server_settings
reset DHCP_server_counters
reset DHCP_proxy_counters
reset pppoe counters
Set reset_action
Show reset_action
Description
Restores individual OfficeConnect Gateway configuration files
(.CFG) from a bulk configuration file. The bulk configuration
function reads all configuration files generated by the
OfficeConnect Gateway processes and concatenates them into a
single compressed file which can then be uploaded by the
OfficeConnect Gateway. A bulk configuration file can be named
using the set bulk_file command.
Resets DHCP client network settings to default values.
Restores the DHCP server settings to initial default values.
Resets the DHCP Proxy counters.
Resets the PPPoE session counters.