Table of Contents
Advertisement
25-8
C
25: SNMP C
HAPTER
list snmp
trap_community_pools
Set Commands
set snmp community
<name>
OMMANDS
Validate Address - Method selected to determine access to this trap
community. The use_address command uses a specified IP address to validate
access, use_pool uses a list of IP addresses to validate access.
The information displayed by this command is shown in the following example.
SNMP TRAP COMMUNITIES
Community Name
IP Address
Kensington
Kerby
Kenwood
1.1.1.3
The list snmp trap_community_pools command displays all SNMP trap
community pools in the SNMP Trap Community Address Pool defined using the
add snmp trap_community_pool command.
The following information is displayed when this List command is used:
Name - designation of the trap community pool
Number of Addresses - Sum of IP addresses associated with the specified trap
community pool
TRAP COMMUNITY POOLS
Name
Joisy
This section describes the following Set-related SNMP commands:
set snmp communities
set snmp trap community <community name>
The set snmp community <name> command modifies parameters for an SNMP
community (authorized user or host to which notifications are sent) configured
with the add snmp community <community_name> command. The community
name and IP address of SNMP requests from managers on the network must
match the list, which you can view using the list snmp communities command.
The following parameters are associated with the set snmp community <name>
command:
access [ro | rw | adm]
address <IP_address>
community_pool <name>
validate_address [use_address | use_pool]
Community Pool Validate
Address
useAddress
usePool
useAddress
Number of
Addresses
5
Advertisement
Table of Contents
