Network Services Commands; Overview; Add Command - 3Com OfficeConnect 3C100XF Cli User's Manual

20

Overview

Add Command

add network service
<service_name>
N
ETWORK
You can configure the following network services for the OfficeConnect Gateway
from the CLI:
SNMP Service


Telnet Service


TFTP Service


This chapter identifies and describes the Network Services commands accessible
from the OfficeConnect Gateway CLI. These commands are listed in the following
table:
Command Command Name
Type
Add add network service <service_name>
Delete delete network service <service_name>
Enable enable network service <service_name>
Disable disable network service <service_name>
List list network services
list available servers
Set set network service <admin_name>
The add network service command configures a network listener process that
provides certain services, including TFTP file access, and SNMP and TELNET
support. To view the available server types, use the list available servers
command
The following parameters are assaulted with the add network service command:
close_active_connections [true | false]
data <ancillary data options>
enabled [yes | no]
server_type [snmpd | tftpd | telnetd]
socket <socket_number>
S C
ERVICES OMMANDS