Table of Contents
Advertisement
8
Overview
CLI Commands
Disable Command
disable interface
<interface name>
Enable Command
enable interface
<interface_name>
I
NTERFACE
This chapter describes the Interface commands accessible from the CLI of the
OfficeConnect Gateway.
The following tables identifies the Interface commands described in this chapter:
Command
Command Name
Type
Enable
enable interface <interface name>
Disable
disable interface <interface name>
List
list interfaces
Set
set interface <interface 1>, <interface 2>, <interface 3>...
Show
show interface <interface_name>
show interface <interface name> settings
For information on the Voice and VoDSL related Interface commands, see Chapter
7, VoDSL and Voice Commands.
Disables any specified interface. A disabled interface remains in the Interface
Table, but does not transmit or receive any data. Use the list interfaces command
to see the currently defined interfaces, and their status.
Enables the specified interface. Enabling an interface enables it to transmit and
receive data. You can enter multiple interfaces (ssss,ssss,ssss) or a range
(slot:3/port:[1-9]). You can use list interfaces to see which interfaces are defined,
and whether they are currently disabled. Use the show icmp settings command
to view edits.
C
OMMANDS
Advertisement
Table of Contents
