Show Command
show tftp request
<input_file_name>
server <IP_name_or_IP_address>
These parameters are described in the following table.
Parameters
Description
<input_file_name> Designation of file to be requested from or sent to the TFTP server.
action
Type of request sent to the TFTP server. Choices: Put or Get
max_timeout
Interval in seconds OfficeConnect Gateway waits for a response from the
TFTP server before the TFTP request is cancelled. The range is 1-300. The
default is 25 seconds.
mode
The text format the file will be transmitted as. Choices: ascii or octet. The
default is ASCII.
rexmt_timeout
Retransmission timeout - interval in seconds OfficeConnect Gateway
waits before retransmitting a TFTP request. The range is 1-60. The default
is 5 seconds.
server
Name or IP address of the TFTP server.
The show tftp request <input_file_name> command displays statistics of the
specified request for TFTP service.
It lists the following information:
Filename - Name of file to be requested from or sent to the TFTP server.
Server - Name or IP address of the TFTP server
Action - Type of request sent to the TFTP server. PUT or GET
Mode - The text format the file is transmitted as. Choices: ASCII or OCTET
(binary). The default is ASCII
Retransmit Timeout - Interval in seconds the OfficeConnect Gateway waits
for a reply from the TFTP server before retransmitting a TFTP request. The range
is 1-60. The default is 5 seconds
Maximum Timeout - Interval in seconds the OfficeConnect Gateway waits for
a response from the TFTP server before the TFTP request is cancelled. The range
is 1-300. The default is 25 seconds
Status - State of each current TFTP request in the table:
Normal - Request is in the table or has been successfully completed
Getting - Initial state: TFTP server is receiving a file
Putting - Initial state: TFTP server is sending a file
Error - Request has finished unsuccessfully and will generate an error
message
Error String - Error message detailing why TFTP request has failed
.
.
.
Show Command
28-5