Table of Contents
Advertisement
For easy identification, the power adapter socket is
surrounded by a yellow border.
Reset
The reset switch is used to reset the gateway.
A "soft" reset keeps your gateway settings. To perform a
"soft" reset, push the reset switch once.
A "hard" reset returns your gateway settings to their
factory default state. To perform a "hard" reset, push and
hold the reset switch for 3 seconds.
Cable/DSL
The Cable/DSL port (identified by a blue border) accepts an
RJ-45 connector to connect your gateway to the Internet.
See "External Cable and DSL Modem Connections" on
page 11 for more details.
Ethernet
Three ports are available to connect to Ethernet hubs or to
connect other Ethernet-compatible computers to the
gateway. These are dual-speed (10/100 Mbps) ports that
accept an RJ-45 connector. For easy identification, the
Ethernet ports are surrounded by a green border.
See "Setting up Ethernet Networking" on page 13 for
more details.
Rear Panel
9
Advertisement
Table of Contents
