Table of Contents
Advertisement
25-2
C
25: SNMP C
HAPTER
Add Commands
add snmp community
<community_name>
add snmp
community_pool
<pool_name>
OMMANDS
This section describes the following Add-related SNMP commands:
add snmp community <community_name>
add snmp community_pool <pool_name>
add snmp trap_community <name>
add snmp trap_community_pool <name> addresses <ip address list>
The add snmp community <community_name> command adds to a table of
SNMP-authorized users.
The following parameters can be configured for the add snmp community
command.
address <IP_address>
access [ro | rw | adm]
community_pool <name>
validate_address [use_address | use_pool]
If you don't want to restrict SNMP access to a particular IP address, specify the
address as "0.0.0.0" (public). The community name and IP address of SNMP
requests from administrators on the network must match the list, which you can
view using the list snmp communities command. The following table describes
the parameters associated with the add snmp community command.
Parameter
<community_name>
address
access
community_pool
validate_address
The add snmp community_pool <pool_name> command adds an entry to the
SNMP Community address Pool table. This command is used in conjunction with
the add snmp community command to allow multiple management station
control of the OfficeConnect Gateway through a pool of IP addresses. The
following parameter can be configured for the add snmp community_pool
<pool_name> command.
Description
Group name that authorizes SNMP requests.
IP address of the remote SNMP manager, in the form nnn.nnn.nnn.nnn
Determines what type of access to SNMP MIBs the specified user has.
Options:
Read Only (RO) - user-level objects
Read Write (RW) - user-level objects
Administrator (ADM) - Administrator allows read access to all objects
and write access to all writable objects. RO is the default on public
(0.0.0.0) networks and RW the default on private networks.
Name of the SNMP community pool to use.
When set to use_address the address of the SNMP community is used to
validate the management station's IP address. When set to use_pool,
the management station's IP address is validated against the list of IP
address associated with the community_pool. The default is
use_address.
Advertisement
Table of Contents
