Uploading Configuration Files (Bulk File) Commands; Restore Factory Default Settings - 3Com OfficeConnect 3C100XF Cli User's Manual

Uploading
Configuration Files
(Bulk File) Commands
save configuration
set bulk_file <file_name>
show bulk_file
Restore Factory
Default Settings
000080 64206d61
000090 373a3136
0000a0 79202255
Bulk files are created for uploading configuration files to the OfficeConnect
Gateway.
The following table identifies the Bulk File commands.
Command Type Command Name
Save save configuration
Set set bulk_file <file_name>
Show show bulk_file
Saves individual configuration files (.CFG) to a bulk configuration file for uploading
to the OfficeConnect Gateway. You can name the bulk configuration file with the
set bulk file <file name> command. The reset command breaks out individual
configuration files from the bulk configuration file.
The set bulk_file <file_name> command specifies the name of an OfficeConnect
Gateway bulk configuration file, which is the compressed concatenation of
individual OfficeConnect Gateway configuration files (.CFG) used for uploading to
the OfficeConnect Gateway. You can name one of two bulk configuration files
with the set bulk_file <file_name> command and break out individual
configuration files from the bulk configuration file with the reset command.
The show bulk_file command displays the name of the OfficeConnect Gateway
bulk configuration file and any error associated with the file. This binary file is a
concatenation of individual OfficeConnect Gateway configuration files (.CFG)
used to upload to the OfficeConnect Gateway. For example:
Bulk Configuration File Name:
Bulk Configuration Error:
This section describes the following Restore Factory Default Settings related
commands:
Command Type Command Name

Uploading Configuration Files (Bulk File) Commands

78206e00 43453032
3a31342c 20466163
73657220 4d616e61
ConfigBulkFile
3-11
41742031 max
n*CE02At
696c6974 17:16:14,
Facility
67657222 "User
Manager",