Deck Replacement - 96 in.
Removal
1. Park the machine on a level surface, disengage the PTO and set the parking brake. Stop the engine, wait for all
moving parts to stop and remove the key.
2. Release the pressure from the hydraulic system before servicing any hydraulic related component,
"Releasing Pressure from the Hydraulic System," chapter 7, page 7-6.
3. Remove the belt,
see "Belt Removal," chapter 6, page 6-20.
4. Remove the two hydraulic lines leading from the hydraulic manifold to the deck (96 in. only) (Figure 12).
6-14
Table of Contents
DECK
CAUTION
The blades are sharp: contacting a blade could result
in serious personal injury. Always wear eye protection
and gloves when handling blades.
Figure 12
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
see