Fuel Tank - Toro Z Master 7500-D Series Service Manual

Fuel Tank

Removal
1. Park the machine on a level surface, disengage the PTO, and engage the parking brake. Stop the engine, wait
for all moving parts to stop and remove the key.
2. Remove the left or right tank cover,
Tank Cover Removal," chapter 5, page 5-19.
3. Remove the supply, return, and vent lines.
4. Remove the two fuel tank clamps. Clamps are captured with a lock nut.
5. Remove the fuel tank mount bolt, washers and spacer (located in cup holder on left side and in the control
cavity on the right side). Bolt is captured by a lock nut.
6. Remove the fuel tank.
NOTE: Fuel tank may be heavy, depending on how much fuel is in it.
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
CHASSIS
DANGER
Do not open a fuel system under high pressure. The
fluid under high pressure that stays in fuel lines can
cause serious injury. Do not disconnect or repair the
fuel lines, sensors, or any other components between
the fuel pump and injectors on engines with a common
rail fuel system under high pressure.
DANGER
Fuel is very flammable and explosive under some
conditions. Do not smoke or let flames or sparks in
your work area.
see "Left Tank Cover Removal," chapter 5, page 5-17 or see "Right
5-21
Table of Contents