CHASSIS
Motion Control Damper
Removal
1. Park the machine on a level surface, disengage the PTO, and engage the parking brake. Stop the engine, wait
for all moving parts to stop and remove the key.
2. Remove the nut securing the damper ball joint to the frame (Figure 19).
NOTE: You will need a T-40 Torx wrench to hold the bolt while removing.
Figure 19
3. Remove the nut securing the damper to the motion control assembly (Figure 20).
Figure 20
4. Remove the damper assembly.
5-29
Z Master 7500-D Series Service Manual
Table of Contents
March 2018 - Digital Edition