CHASSIS
Adjusting the Motion Control Neutral Lock Pivot
NOTE: The flanged nut can be adjusted to obtain a more desired motion control lever resistance when
moving it to the neutral lock position (Figure 26).
A
B
Figure 26
1. Loosen the jam nut.
2. Tighten or loosen the flanged nut to the desired feel. For more resistance, tighten the flange nut. For less
resistance, loosen the flange nut.
3. Tighten the jam nut.
5-35
Z Master 7500-D Series Service Manual
Table of Contents
March 2018 - Digital Edition