Inserting A Module Into The Selectbay - Toshiba 8000 User Manual

Inserting a module into the SelectBay

This section explains how to install the module and its cover into
the SelectBay.
1 Snap the module into the cover, if necessary.
To install the external diskette drive, you must remove it from
its external casing. To remove it, see "Inserting the external
diskette drive" on page 39.
To install the battery, you must make sure it's in its battery
case. See "Placing the battery into the adapter" on page 40
and "Removing the battery from the adapter" on page 41.
2 Slide the module all the way into the SelectBay.
3 Engage the SelectBay eject lock.
HINT: If the SelectBay eject lock does not lock correctly, the
machine displays the following message: Selectable Bay
lock key is unlocked. Please power off the machine and lock
the Selectable Bay lock key, then power on.
Inserting the external diskette drive
The external diskette drive ships in a case and is ready to use.
Before installing the external diskette drive into the SelectBay, you
must remove it from the case.
To remove the external diskette drive from the case:
1 Simultaneously pinch the two eject buttons.
The external diskette drive will partially eject from the case.
2 Carefully pull the diskette drive by the front edges to
completely remove it from the holder.
Hardware Features
Swapping SelectBay modules
Part I: Getting to Know Your Computer
39