Toshiba 8000 User Manual page 137

Problems when you turn on the computer
2 Restart your computer and press
Pressing
TSETUP. This command instructs the computer to start from
the diskette drive.
The message "Welcome to Toshiba Companion Diskette"
appears on your screen.
3 Press
Enter.
The Toshiba Companion Diskette Main Menu displays a list
of options.
4 Choose Exit to DOS, and press
The MS-DOS prompt A:> appears.
5 Type
sys c:
The computer processes the command and displays the
message "system transferred" when complete.
6 Remove the diskette from the diskette drive.
7 Restart your computer.
Your system should start Windows from the hard drive.
You press the power button and hear the system start, but
Windows NT does not load correctly.
There is a problem starting Windows NT from your hard disk.
Follow these steps if you have a diskette drive:
1 Boot from the hard drive and select "Windows NT
Workstation 4.00," then press
2 When prompted to press the spacebar, press the spacebar to
invoke the Hardware Profile/Last Known Good Menu.
The computer stars from the FDD and displays the message
"Welcome to Toshiba Companion Diskette" on your screen.
changes the Boot Priority option setting in
F
, then press
Enter.
Part I: Getting to Know Your Computer
Troubleshooting Guide
when the system starts.
F
Enter.
.
Enter
113