Table of Contents
Advertisement
Using a password in Windows NT Workstation 4.0
5
Release the
Esc
6
Press
.
F1
The system displays the first System Setup screen.
7
Press
to move to the PASSWORD section of the screen.
P
8
Press the spacebar.
System Setup asks you to enter a new password.
9
Type a password of one to 16 characters and press
You may use any combination of letters and numbers in your
password.
10 When System Setup prompts you to do so, verify the
password by typing it again and pressing
If the two passwords match, System Setup displays
Registered.
If the two passwords don't match, System Setup displays an
error message. Repeat steps 9 and 10 to enter the password
again.
11 Press
to save your change and close System Setup.
End
System Setup asks you to confirm your choice.
12 Press
to confirm you want to quit.
Y
CAUTION: The computer overwrites all existing information
on the password service diskette. Make sure the diskette you
use does not contain any important information.
System Setup prompts you to select the type of diskette you
inserted.
13 Press
if you're using a 1.44 MB diskette or press
1
using a 720 KB diskette.
Keeping Your Files Safe
key.
.
Enter
Part II: Technical Reference
177
.
Enter
if you're
2
Hide quick links:
Advertisement
Table of Contents
