Using An Undock (Eject) Password - Toshiba 8000 User Manual

174
Keeping Your Files Safe
Using a password in Windows 95 and Windows 98
If you choose
password.
6 Type your password and press
If the password you typed matches the registered hard disk
drive Master password, the password is deleted.
7 Restart the computer for your changes to take effect.

Using an Undock (Eject) password

If you have registered a user-level password, you can use it as an
Undock/Eject password.
Turning on the Undock password option (called the Eject
password in TSETUP) prevents an authorized user from
disconnecting the computer from the optional Desk Station V Plus
or the NoteDock II Enhanced Port Replicator. This protects both
your computer and your data.
HINT: You must register a password in Toshiba Utilities or
TSETUP before you can use the Undock password option.
This section provides instructions for turning on the Undock
password option through Toshiba Utilities. For information about
setting an Eject password in TSETUP, see "System Setup" on
page 153.
With the Undock password enabled, you must enter your
password before undocking your computer.
Turning on the Undock password option
1 Click Start, then point to Programs.
2 Point to Toshiba Utilities.
Part II: Technical Reference
, DISKPW prompts you to enter your
Y
Enter
.