Removing a module from the Slim SelectBay
NOTE
1
Do one of the following:
❖
❖
2
Slide the Slim SelectBay release toward the front of the
computer.
3
Slide the Slim SelectBay out of the computer.
Sample sliding out the module
Inserting a module into the Slim SelectBay
To install a module into the Slim SelectBay, simply slide the
module all the way into the Slim SelectBay until the latch
locks into place.
Use caution when lifting or turning your computer. Failure to
do so may result in damage to components, such as cables,
attached to your computer, or to the computer itself.
Turn off the computer.
Leave the computer on and hot swap the module. First,
stop the module by clicking the Safely Remove
Hardware icon on the System tray. After the module is
stopped, it is safe to remove it.
Exploring Your Options
Using the Slim SelectBay®
157
®
®