Installing a memory module
You install additional memory modules into the memory
expansion slots on the base of the computer. You will need a small
Phillips screwdriver for this procedure.
Preparing to install with Windows 95/Windows 98
Before you can install a memory module, you must first shut
down the computer. To shut down and turn off the computer in
Windows 95/Windows 98:
1
Press
pop-up window.
2
If Resume Mode is on, hold
is selected.
3
Release
The Resume Mode pop-up window disappears.
4
Click Start, then click Shut Down.
Windows displays the Shut Down Windows dialog box.
5
Select Shut down the computer, then click Yes or OK, as
appropriate.
Windows shuts down and automatically turns off the
computer.
Preparing to install with Windows NT
Before you can install a memory module, you must first shut
down the computer.
To shut down and turn off the computer in Windows NT:
1
Click Start then click Shut Down.
Windows NT 4.0 displays the Shut Down Windows dialog
box.
and
simultaneously to display the Resume Mode
Fn
F3
.
Fn
Part I: Getting to Know Your Computer
Hardware Features
Adding memory
and press
until Boot Mode
Fn
F3
33