Inserting A Module Into The Slim Selectbay; Inserting And Removing Hard Drives - Toshiba TE2000 User Manual

74
Connecting Other External Devices

Inserting and removing hard drives

Inserting a module into the Slim SelectBay

To install a module into the Slim SelectBay, simply slide the
module all the way into the Slim SelectBay.
Inserting and removing hard drives
Depending upon the original hard drive installed in your computer,
you may wish to increase storage capacity. You may add hard
drive types based on those available for your computer. You can
also additional hard drive space by inserting a drive into the select
bay module.
To change the internal hard drive.
1 Shut down your computer completely using the Shut Down
command. See
page
2 Unplug the computer.
3 Close the display panel and remove any cables you may have
connected.
4 Turn the computer upside down.
5 Remove the screw on the hard drive bay cover.
Removing the hard drive cover screw
"Powering down the computer" on
102.
®