Table of Contents
Advertisement
170
Keeping Your Files Safe
Using a password in Windows 95 and Windows 98
Setting a hard disk drive User password
1
If your diskette drive is not installed in the SelectBay, connect
the external diskette drive or swap drives in the SelectBay. To
swap drives, see "Using PC Card slots" on page 42.
2
Click Start, then click Shut Down.
3
Click Restart the computer in MS-DOS mode and click
Yes, or OK, as appropriate.
Windows 95/Windows 98 shuts down the computer, then
restarts it in MS-DOS mode and displays a system prompt.
4
At the system prompt, type
The Hard Disk Drive Password program, DISKPW, displays
a warning screen.
5
To set a hard disk drive User password, type
To quit without setting a password, type
DISKPW displays another warning and asks you whether you
want to set a hard disk drive User password.
6
To set a hard disk drive User password, type
To exit without setting a password, type
DISKPW displays another warning and asks you whether you
want to set a hard disk drive User password.
7
To set a hard disk drive User password, type
To exit without setting a password, type
Part II: Technical Reference
and press
c:\dos\diskpw
and press
3
.
N
.
N
.
Enter
and press
.
1
Enter
.
Enter
.
Y
.
Y
Hide quick links:
Advertisement
Table of Contents
