Toshiba 8000 User Manual page 272

248
Glossary
keyboard: The device you use to type information into the computer.
K
Each key on the keyboard is a switch that is activated when you
press it. The switch sends a specific code, representing the character
printed on the key, to the processor.
keyboard shortcut: A key or combination of keys that you use to perform
a task instead of using a pointing device such as the AccuPoint.
kilobyte (KB): A unit of data storage equal to 1024 bytes. Its
abbreviations (K and KB) are taken from the Greek word kilo,
meaning 1000, although the abbreviation refers to 1024, or 2 raised
to the 10th power. See also byte.
legacy device: In a PC, an expansion device or card that does not have
L
the ISA Plug and Play capability built into it.
light emitting diode (LED): A semiconductor device that emits light
when it receives an electric current. Used for indicators like the disk
activity light.
liquid crystal display (LCD): A type of display that uses a liquid
substance between two transparent electrode panels. When an
electric current passes through the electrodes, the molecules in the
liquid form a crystalline pattern that polarizes the light passing
through it. A filter over the electrodes permits only non-polarized
light to pass to the surface of the display, creating light and dark
pixels.
load: To move information from a storage device (such as a CD-ROM)
into memory for processing.
local bus: A type of bus that connects devices directly to the
microprocessor. Because there are no wires between the CPU and
the device, information is passed at a much greater speed than
through a traditional bus. See also bus.
logical drive: A section of a disk that is recognized by the operating
system as a separate disk drive. A system's logical drives may differ
from its physical drives. For example, a single hard disk drive may
be partitioned into two or more logical drives.
low-density disk: see double-density disk.
Part III: Appendixes