Inserting A Module Into The Slim Selectbay; Inserting And Removing Hard Drives - Toshiba M2 User Manual

82
Connecting Other External Devices

Inserting and removing hard drives

Inserting a module into the Slim SelectBay

To install a module into the Slim SelectBay, simply slide the
module all the way into the Slim SelectBay until the latch
locks into place.
Inserting and removing hard drives
Your computer can use hard drives with various capacities.
Depending upon the original hard drive installed in your
computer, you may wish to increase storage capacity by
changing the internal drive, or you can add additional hard
drive space by inserting a drive into the select bay module.
To change the internal hard drive.
1 Shut down your computer completely using the Shut
down or Turn Off command. See
computer" on page
2 Unplug the computer. See
on page
3 Close the display panel and remove any cables you may
have connected.
4 Turn the computer upside down and remove the battery.
5 Remove the screw on the hard drive bay cover.
Removing the sample hard drive bay cover screw
57.
135.
®
"Turning off the
"Changing the main battery"