General Safety Information - Agilent Technologies 1200 Series Manual

10
Appendix

General Safety Information

General Safety Information

General Safety Information
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. Agilent
Technologies assumes no liability for the customer's failure to comply with
these requirements.
Ensure the proper usage of the equipment.
WA R N I N G
The protection provided by the equipment may be impaired.
➔
General
This is a Safety Class I instrument (provided with terminal for protective
earthing) and has been manufactured and tested according to international
safety standards.
Operation
Before applying power, comply with the installation section. Additionally the
following must be observed.
Do not remove instrument covers when operating. Before the instrument is
switched on, all protective earth terminals, extension cords,
auto-transformers, and devices connected to it must be connected to a
protective earth via a ground socket. Any interruption of the protective earth
grounding will cause a potential shock hazard that could result in serious
138
The operator of this instrument is advised to use the equipment in a manner as
specified in this manual.
1200 Series Quarternary Pump User Manual