Agilent Technologies 1200 Series Manual page 99

7
Insert the plungers and carefully press them into the seal.
9
Slide the pump head assembly onto the metering drive.
Apply a small amount of pump head grease to the
pumphead screws and the balls of the spindle drive.
Tighten the pumphead screws stepwise with increasing
torque.
1200 Series Quarternary Pump User Manual
8
Tighten the lock screw.
10
Reconnect all capillaries, tubes and the active inlet valve
cable to its connector.
7
Maintenance
Simple Repairs
99