Servicing the Engine Oil
Service Interval: Before each use or daily
After the first 8 hours
Every 100 hours (more often in dirty or dusty
conditions).
Every 200 hours—Change the engine-oil filter
(more often in dirty or dusty conditions).
Engine-Oil Specifications
Oil Type: Detergent oil (API service SF, SG, SH, SJ,
or SL)
Crankcase Capacity: 1.9 L (64 fl oz) with a filter
change; 1.7 L (57 fl oz) with no filter change
Viscosity: See the table below.
Figure 37
Note:
Use of multi-grade oils (5W-20, 10W-30, or
10W-40) increases oil consumption. Check the oil
level more frequently when using them.
Checking the Engine-Oil Level
Note:
Check the oil when the engine is cold.
Important:
If you overfill or underfill the engine
crankcase with oil and run the engine, you may
damage the engine.
1.
Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
Note:
Ensure that the engine is cool so that the
oil has had time to drain into the sump.
3.
To keep dirt, grass clippings, etc., out of the
engine, clean the area around the oil-fill cap and
dipstick before removing it
g037096
32
(Figure
38).
Figure 38
g404659
g194611