Positioning The Seat; Adjusting The Motion-Control Levers - Toro 74682 Operator's Manual

rise slightly from the seat; the engine should
shut off.

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable (Figure 9).
Figure 9
Adjusting the
Motion-Control Levers
Adjusting the Height
You can adjust the motion-control levers higher or
lower for maximum comfort
Adjusting the Tilt
You can adjust the motion-control levers forward or
rearward for your comfort.
g027249
1. Loosen the upper bolt holding the control lever
to the control-arm shaft.
2. Loosen the lower bolt just enough to pivot the
control lever forward or rearward
3. Tighten both bolts to secure the control lever in
the new position.
4. Repeat the adjustment for the other control lever.
18
(Figure 10).
Figure 10
(Figure
g027252
10).