Activating Pin Code; Setting Manual Or Permanent Switching; Hour Counter - Theben TR 611 top2 Operating Instructions Manual

Activating PIN code

The PIN code is set in OPTIONS via the menu.
L If you have forgotten your PIN, call the Theben Hotline.
L Have the serial number ready
MENU
OPTIONS
OPERATING
HOURS
EXT INPUT
LCD ILLU-
MINATION
LANGUAGE
u
PIN
FACTORY
SETTING
INFO
END

Setting manual or permanent switching

Manual or permanent switching can be set via the menu in
MANUAL or (in the automatic screen) by button combination
(see picture).
•
Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•
Permanent switching:
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective
Chanel
C1
Activating manual control
Briefly press both buttons simultaneously
†
¾
Activating permanent switching
Press both buttons simultaneously for 2 seconds
† ¾
Cancelling manual/permanent switching
Press both buttons simultaneously
† ¾
NO PIN
WITH PIN u CURRENT
PIN
NEW PIN
00 00
Chanel
C2
Set external input
For the channel, an EXTERNAL INPUT (see figure) can be set
with different functions.
3 sub-menus can be selected: Inactive, push button (function),
switch (function)
•
INACTIVE: The external input has no function
•
PUSH BUTTON: Manual (manual control), Timer (count-
down timer) are selectable
•
SWITCH: Permanent On, permanent Off are selectable
L If a function is activated via an external push button or
switch, EXTERNAL is displayed.
MENU
OPTIONS
OPERATING
HOURS
EXTERNAL
OUTPUT
LCD ILLU-
MINATION
LANGUAGE
PIN
FACTORY
SETTING
Press MENU, with u select EXT INPUT and follow the indi-
†
¾
cations on the display.

Hour counter

The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
ok
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
†
¾
to 10,000 h)
CHANNEL C1
u
u
BUTTON OVERRIDE
TIMER
SWITCH
NOT ACTIVE
INFO
5