Installing/Removing Plug-In Boards And Blank Panels On The Rear Side - Sony HDCU2500 Maintenance Manual

4-5-2.

Installing/Removing Plug-in Boards and Blank Panels on the Rear Side

1. Remove the two screws and pull out each plug-in board or detach the blank panel.
2. To install the removed plug-in board, insert it along the guide of each slot and push it so that it is securely connected
to the connector on the MB-1181 board.
3. Install the two screws.
MB-1181 board
Guide
HDCU2500
Blank panel
Plug-in board
B3 x 5
B3 x 5
Blank panel
Plug-in board
B3 x 5
B3 x 5
4-20