Table of Contents
Advertisement
2.
Unsolder the round type connector (12P) to detach the CN-2677G board.
Remove solder
3.
Install the removed parts by reversing the steps of removal.
4-6-6.
VIF-52 Board
Preparation
1.
Remove the rear panel assembly. (Refer to
2.
Remove the rear sub assembly (included in the HIF-62 board and the SDI-99 board) . (Refer to
Board")
Procedure
1.
Disconnect the flexible flat cable from the connector CN5 on the CNB-29A board.
2.
Disconnect the VIF-52 board from the connector on the MB-1181 board.
CNB-29A board
HDCU2500
.
CN-2677G board
"4-4-1. Removal and Installation of Rear Panel
MB-1181 board
CN5
VIF-52 board
Flexible flat cable
Assembly")
"4-6-1. HIF-62
4-25
Hide quick links:
Advertisement
Table of Contents
