C02: BAR CHARACTER
Note
Menu numbers 11 and 12 are displayed by scrolling.
Menu Image
<BAR CHARACTER>
C02 TOP
↓ ↓
1
2
3
4
5
6
7
8
9
10
11
12
→<ALL CLEAR>
Setting character string
Note
Use the CCU CONFIGURATION menu to check indication of data that is input on this page.
COLOR BAR (01) → BAR-CHARA: ON
The procedure to edit the first line is described below as an example.
1.
Turn the control knob clockwise to set the cursor to line number 1 and turn the CANCEL/ENTER lever to ENTER.
The unit enters the edit mode and the software keyboard field is displayed.
<BAR CHARACTER>
↓↓
Editing data at the cursor
1?
2
position
3
4
Software keyboard
5
%&'()*+,-./0123456789:
$
;<=>?@ABCDEFGHIJKLMNOP
STUVWXYZ[¥]_
INS DEL RET
2.
Turn the CANCEL/ENTER lever to ENTER.
The unit transitions to the character input mode and the cursor appears in the software keyboard field.
3.
Set the cursor to the character you want to input with the control knob.
HDCU2500
Item
BAR CHAR-
ACTER
ALL CLEAR
C02 TOP
Q
R
ESC END
Settings
Description
Sets strings 1 to 12 that are superimposed
-
on the color bar signal.
-
Execute to clear all character strings. (Ex-
ecute via ENTER.)
3-17