Electrical Alignment; Preparations; Notes On Adjustments; Equipment Required - Sony HDCU2500 Maintenance Manual

5-1.

Preparations

5-1-1.

Equipment Required

Measuring equipment
Equipment
Digital oscilloscope (300 MHz or higher)
SD waveform/Vector monitor
SD signal generator
Audio oscillator
Frequency counter
Related equipment
Model name
HDC2400/2500
MSU-1000/1500
Tools
Name
EX-982 board
EX-983 board
EX-984 board
5-1-2.

Notes on Adjustments

• Make sure all the measures have already been calibrated.
• Make sure "5-1-4. Initialization Settings"
• Make sure the adjustment of the HDC2400/2500 has already been finished.
• Types of the color bars to be output from the built-in synchronizing signal generator :
Signal format
HD-SDI
SD-SDI (D1)
SD-Component-analog
(HKCU1001)
SD-Composite-analog
(HKCU1001)
SD-Composite-analog
(HKCU1001)
• To adjust this unit, extend each plug-in board. Before pulling out the boards, be sure to turn off the main power.
• Before starting adjustment, warm up for about 10 minutes.
• Before using the MSU-1000/1500, check the version of the ROM. For details, refer to Section
ROM and Software Version
HDCU2500
Section 5

Electrical Alignment

Type name
Tektronix TDS460A or equivalent
Tektronix 1780R or equivalent (for NTSC)
Tektronix 1781R or equivalent (for PAL)
Tektronix TSG170A or equivalent (for NTSC)
Tektronix TSG271 or equivalent (for PAL)
Tektronix SG-5010 or equivalent
Advantest TR5821AK or equivalent
Description
HD color video camera
Master setup unit
Usage/Note
Front-side extended board
Rear-side extended board
SDP-17 extended board
have already been finished.
Y
100 %
100 %
100 %
75 %
100 %
ROM".
Part No.
A-1153-700-A
A-1153-701-A
A-1153-715-A
C
100 %
75 %
75 %
75 % (SMPTE)
75 % (EBU)
"1-1. Checking the
5-1