Lc Type Connector; Cleaning Connectors/Cables Of Lemo; When The Optical Connector Cleaner (Commercially Available) Is Not Available - Sony HDCU2500 Maintenance Manual

3. While pressing the optical connector cleaner against the tip of the white optical contact, rotate the optical connector
cleaner by 4 to 5 turns clockwise.
Holding the optical connector cleaner at around its support facilitates to apply the pressure.
Alignment sleeve
Optical connector cleaner
Support

[LC type connector]

Clean the tip of the white optical contacts using the optical connector cleaner.
1-14-2. When the Optical Connector Cleaner (Commercially Available) is not
Available

Cleaning connectors/cables of LEMO

Clean the LEMO connectors and cables using the following procedure.
Tools required
• Alignment sleeve remover HC-001 (for female connector)
Sony Part No,: J-6480-010-A
or DCC.91.312.5LA or manufactured by LEMO, or equivalent
Note
Insert the shorter nose end when removing/installing the alignment sleeve. Grasp not the shock absorber portion
of the remover but the handle in use.
Shock absorber portion
Insert the shorter nose end
• Alcohol (commercially available)
• Cotton swabs (commercially available)
Note
Use a cotton swab whose diameter is about 4 mm. If a cotton swab whose diameter exceeds 5 mm is used, the cotton
swab cannot be inserted into the end of the connector and the tip of the optical contact cannot be cleaned.
HDCU2500
Optical contact (white)
Optical contact (white)
Handle
Optical contacts (white)
1-34