2.
Remove the four screws to detach the CN-2676 board.
CN3
Harness (MIC)
3.
Install the removed parts by reversing the steps of removal.
4-6-5.
CN-2677G Board
Preparation
1.
Remove the rear panel assembly. (Refer to
2.
Remove the rear sub assembly (included in the HIF-62 board and the SDI-99 board). (Refer to
Board")
Procedure
1.
Disconnect the flexible flat cable from the connector CN2 on the CN-2677G board.
CN-2677G board
CN2
Flexible flat cable
HDCU2500
CN-2676 board
P2.6 x 5
P2.6 x 5
"4-4-1. Removal and Installation of Rear Panel
Assembly")
"4-6-1. HIF-62
4-24