Sony HDCU2500 Maintenance Manual page 98

C09: PROMPT/TRUNK
Menu Image
<PROMPT/TRUNK> C09 TOP
PROMPTER :(1CH)
NETWORK/TRUNK : OFF
TRUNK SETTINGS
CH : 2CH
IF : 232C
RATE : (19Kbps)
TRANSMIT: AUTO
CABLE : CAMERA CABLE
AUX REMOTE: DISABLE
HDCU2500
Item Settings
PROMPTER (1CH)
NETWORK/TRUNK OFF, ON
TRUNK CH 1CH, 2CH
SETTINGS
IF 232C, 422A
RATE (150Kbps),
(75Kbps) ,
(38Kbps), (19Kbps)
TRANSMIT AUTO, HIGH BIT
RATE, HD-SDI
CABLE CAMERA CABLE,
COAX
AUX REMOTE DISABLE, ENA-
BLE
Description
Number of prompter lines.
（Fixed to 1CH）
The HD prompter cannot be
used when this is set to ON.
Note
The HD prompter is availa-
ble when HDC2500 series
camera is used, but is not
available when HDFX/TX
is connected.
Sets the number of channels to
be used.
Sets the communication line
mode.
Display only
Note
(150Kbps) and (75Kbps)
are selectable only when a
high-speed TRUNK com-
patible camera is connec-
ted.
• HDC2500 series
• HDC1500R/LD series
• HDC1500R series
(Firmware version
2.11, PLD [DAP-33A]
version 4.10, PLD
[DPR-265A] version
3.02, PLD [SDI-84A]
version 2.11 and later)
• HDC1500/1500R ser-
ies with built-in HKC-
HB10/15 (Firmware
version 3.20, PLD
[DAP-33A] version
4.10, PLD
[DPR-265A] version
3.02, PLD [SDI-95]
version 1.11 and later)
Sets the optical transmission
rate between the camera and
CCU. (AUTO is recommen-
ded)
Note
When TRANSMIT is set to
HIGH BIT RATE,
HDC1500 series or HDFX/
TX cannot be connected.
Sets the transmission format
between the camera and CCU.
Sets whether to use AUX RE-
MOTE.
Note
AES/EBU is not available
when AUX REMOTE is set
to ENABLE.
3-22