Installing The Side Caps (L) And (R) - Sony CCP-9000-C Installation Manual

1-4-2. Installing the Side Caps (L) and (R)

The width of the MKS-9011/9012 can be made below into
the width of the opening of the 19-inch standard rack by
attaching the side caps (L) and (R) to the MKS-9011/9012.
Tool required
. Side caps (L) and (R): 3 pcs each (Supplied)
. Screws (B3 x 6):
12 pcs
1. Remove the six module panels on both sides. (Refer to
Section 1-4-1.)
2. Remove the six screws, and remove the three caps (L)
and (R) each on both sides in the direction of the
arrow.
3. Remove the eight screws, and remove the rack mount
brackets (L) and (R).
Cap (L)
PSW3 x 6
Rack mount
braket (L)
B3 x 6
CCP-9000
PSW
3 x 6
Cap (R)
B3 x 6
Rack mount
braket (R)
4. Install the three side caps (L) and (R) each on both
sides by tightening the twelve screws.
5. Install the caps (L) and (R), and module covers in the
reverse order of removal.
Side cap (L)
B3 x 6
1-4. Installing the Control Panel
B3 x 6
Side cap (R)
1-7