Configuring Lan; Figure 17Lan Setup; Table 11Lan Setup - ZyXEL Communications P-660R-Tx v2 Series User Manual

P-660R-Tx v2 Series User's Guide
After all the routing information is updated, the computer can access the ZyXEL Device and
the Internet as if it is in the same subnet as the ZyXEL Device.

5.6 Configuring LAN

Click LAN and LAN Setup to open the following screen.
Figure 17 LAN Setup
The following table describes the labels in this screen.
Table 11 LAN Setup
LABEL
DHCP
DHCP
58
DESCRIPTION
If set to Server, your ZyXEL Device can assign IP addresses, an IP default
gateway and DNS servers to Windows 95, Windows NT and other systems that
support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients. Enter
the IP address of the actual, remote DHCP server in the Remote DHCP Server
field in this case.
When DHCP is used, the following items need to be set:
Chapter 5 LAN Setup