Figure 33Remote Management; Table 23Remote Management - ZyXEL Communications P-660R-Tx v2 Series User Manual

Figure 33 Remote Management
The following table describes the labels in this screen.
Table 23 Remote Management
LABEL
Server Type
Access Status
Port
Secured Client
IP
Apply
Cancel
Chapter 10 Remote Management Configuration
DESCRIPTION
Each of these labels denotes a service that you may use to remotely manage the
ZyXEL Device.
Select the access interface. Choices are All, LAN Only, WAN Only and Disable.
This field shows the port number for the remote management service. You may
change the port number for a service in this field, but you must use the same port
number to use that service for remote management.
The default 0.0.0.0 allows any client to use this service to remotely manage the
ZyXEL Device. Type an IP address to restrict access to a client with a matching IP
address.
Click Apply to save your settings back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
P-660R-Tx v2 Series User's Guide
89