Configuring Sua Server; Figure 26Nat Mode; Table 17Nat Mode - ZyXEL Communications P-660R-Tx v2 Series User Manual

Figure 26 NAT Mode
The following table describes the labels in this screen.
Table 17 NAT Mode
LABEL
None
SUA Only
Edit Details
Full Feature
Edit Details
Apply

7.5 Configuring SUA Server

Note: If you do not assign an IP address in Server Set 1 (default server), the ZyXEL
Device discards all packets received for ports that are not specified here or in
the remote management setup.
Click NAT, select SUA Only and click Edit Details to open the following screen.
Refer to Table 16 on page 75
Chapter 7 Network Address Translation (NAT) Screens
DESCRIPTION
Select this radio button to disable NAT.
Select this radio button if you have just one public WAN IP address for your ZyXEL
Device. The ZyXEL Device uses Address Mapping Set 1 in the NAT - Edit SUA/NAT
Server Set screen.
Click this link to go to the NAT - Edit SUA/NAT Server Set screen.
Select this radio button if you have multiple public WAN IP addresses for your ZyXEL
Device.
Click this link to go to the NAT - Address Mapping Rules screen.
Click Apply to save your configuration.
for port numbers commonly used for particular services.
P-660R-Tx v2 Series User's Guide
77