This chapter introduces and shows you how to configure the broadcast storm control feature.
13.1 Overview
Broadcast storm control limits the number of broadcast frames that can be stored in the switch
buffer or sent out from the switch. Broadcast frames that arrive when the buffer is full are
discarded. Enable this feature to reduce broadcast traffic coming into your network.
13.2 Broadcast Storm Control Setup
Click Advanced Application, Broadcast Storm Control in the navigation panel to display
the screen as shown next.
Figure 44 Broadcast Storm Control
The following table describes the labels in this screen.
Table 25 Broadcast Storm Control
LABEL
Active
Port
Chapter 13 Broadcast Storm Control
Broadcast Storm Control
DESCRIPTION
Select this check box to enable broadcast storm control on the switch. Clear this
check box to disable the feature.
This field displays a port number.
C
H A P T E R
ES-2108 Series User's Guide
1 3
95