Table 58 Command Summary: Configuration Mode (continued)
COMMAND
get-community
<property>
set-community
<property>
trap-community
<property>
trap-destination
<ip>
spanning-tree
<port-list>
<port-list> path-
cost <1-65535>
<port-list>
priority <0-255>
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-
30>
help
priority <0-61440>
spq
ssh
known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
storm-control
time
<Hour:Min:Sec>
date <month/day/
year>
help
timezone <-
1200|...|1200>
timesync
<daytime|time|ntp>
server <ip>
trunk
<T1|T2>
<T1|T2>interface
<port-list>
Chapter 27 Introducing the Commands
ES-2108 Series User's Guide
DESCRIPTION
Sets the get community.
Sets the set community.
Sets the trap community.
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
Enables STP on the switch.
Enables STP on a specified
port.
Sets the STP path cost for a
specified port.
Sets the priority for a specified
port.
Sets Hello Time, Maximum Age
and Forward Delay.
Displays help information.
Sets the bridge priority of the
switch.
Sets the switch to use Strictly
Priority Queuing (SPQ).
Adds a remote host to which the
switch can access using SSH
service.
Enables broadcast storm
control on the switch.
Sets the time in hour, minute
and second format.
Sets the date in year, month
and day format.
Displays help information.
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
Sets the time server protocol.
Sets the IP address of your time
server.
Activates a trunk group.
Adds a port(s) to the specified
trunk group.
165