ZyXEL Communications ES-2108 User Manual page 167

Table 59 interface port-channel Commands (continued)
COMMAND
exit
flow-control
frame-type
<all|tagged>
gvrp
help
inactive
mirror
name <port-name-
string>
no
Chapter 27 Introducing the Commands
dir
<ingress|egress|bo
th>
bandwidth-limit
bmstorm-limit
diffserv
egress set
flow-control
gvrp
inactive
mirror
vlan-trunking
ES-2108 Series User's Guide
DESCRIPTION
Exits from the interface port-
channel command mode.
Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.
Enables this function to permit
VLAN groups beyond the local
switch.
Displays a description of the
interface port-channel
commands.
Disables the specified port(s) on
the switch.
Enables port mirroring in the
interface.
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
Sets a name for the port(s).
Enter a descriptive name (up to
nine printable ASCII
characters).
Disables bandwidth limit on the
port(s).
Disables broadcast storm
control limit on the port(s).
Disables DiffServ on the
port(s).
Disables outgoing traffic on the
port for port-based VLAN.
Disables flow control on the
port(s).
Disables GVRP on the port(s).
Enables the port(s) on the
switch.
Disables port mirroring on the
port(s).
Disables VLAN trunking on the
port(s).
167