Chapter 16 Port Authentication; Overview; Radius; Port Authentication Configuration - ZyXEL Communications ES-2108 User Manual

This chapter describes the 802.1x authentication method and RADIUS server connection
setup.

16.1 Overview

IEEE 802.1x is an extended authentication protocol
Authentication Dial In User Service, RFC 2138, 2139) for centralized user profile and
accounting management on a network RADIUS server.

16.1.1 RADIUS

RADIUS (Remote Authentication Dial-In User Service) authentication is a popular protocol
used to authenticate users by means of an external server instead of (or in addition to) an
internal device user database that is limited to the memory capacity of the device. In essence,
RADIUS authentication allows you to validate an unlimited number of users from a central
location.

Figure 48 RADIUS Server

16.2 Port Authentication Configuration

To enable port authentication, first activate IEEE802.1x security (both on the switch and the
port(s)) then configure the RADIUS server settings.
Click Advanced Application, Port Authentication in the navigation panel to display the
screen as shown.
2. At the time of writing, only Windows XP of the Microsoft operating systems supports it. See the Microsoft web site
for information on other Windows operating system support. For other operating systems, see its documentation.
If your operating system does not support 802.1x, then you may need to install 802.1x client software.

Chapter 16 Port Authentication

C
H A P T E R
Port Authentication
2
that allows support of RADIUS (Remote
ES-2108 Series User's Guide
1 6
103