Spq; Wrr; Figure 116 No Ssh Command Example; Figure 117 Spq Command Example - ZyXEL Communications ES-2108 User Manual

ES-2108 Series User's Guide
known-hosts <host-ip>
known-hosts <host-ip>
[1024|ssh-rsa|ssh-dsa]
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
• Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption
key from the list of known hosts.

Figure 116 no ssh Command Example

ras(config)# no ssh key rsa1
ras(config)# no ssh known-hosts 172.165.1.8
ras(config)# no ssh known-hosts 172.165.1.9 ssh-rsa

28.8 spq

Syntax:
Activates Strict Priority Queuing (SPQ). An example is shown next.

Figure 117 spq Command Example

ras(config)# spq

28.9 wrr

Syntax:
where
<wt1> .. <wt4>
The following example sets the switch to use WRR queuing and sets the queue weights for Q0
to Q3.
180
Remove specific remote hosts from the list of all known hosts.
Remove remote known hosts with a specified public key (1024-
bit RSA1, RSA or DSA).
spq
wrr <wt1> <wt2> <wt3><wt4>
Enables WRR (Weighted Round Robin) queuing method on the switch.
Sets the interface to use WRR queuing. A weight value of one to eight is
given to each variable from to .
wt1 wt4
Chapter 28 Command Examples