Configure Vlan Port Settings; Figure 36 Vlan: Vlan Port Setting - ZyXEL Communications ES-2108 User Manual

ES-2108 Series User's Guide
Table 15 VLAN: Static VLAN (continued)
LABEL
Control
Tagging
Add
Cancel
Clear
VID
Active
Name
Delete
Cancel

8.5.3 Configure VLAN Port Settings

To configure the VLAN settings on a port, click the VLAN Port Setting link in the VLAN
Status screen.

Figure 36 VLAN: VLAN Port Setting

78
DESCRIPTION
Select Normal for the port to dynamically join this VLAN group using GVRP. This is
the default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Select TX Tagging if you want the port to tag all outgoing frames transmitted with
this VLAN Group ID.
Click Add to add the settings as a new entry in the summary table below.
Click Cancel to reset the fields.
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
Chapter 8 VLAN