Supported Mibs; Snmp Traps; Configuring Snmp; Table 44 Snmp Traps - ZyXEL Communications ES-2108 User Manual

Table 43 SNMP Commands
COMMAND
Set
Trap

22.3.1 Supported MIBs

MIBs let administrators collect statistics and monitor status and performance.
The switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• Private MIBs

22.3.2 SNMP Traps

The switch sends traps to an SNMP manager when an event occurs. SNMP traps supported are
outlined in the following table.

Table 44 SNMP Traps

GENERIC TRAP
0 (Cold Start)
1 (Warm Start)
2 (linkDown)
3 (linkUp)
4 (Authentication
Failure)

22.3.3 Configuring SNMP

From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
Chapter 22 Access Control
DESCRIPTION
Allows the manager to set values for object variables within an agent.
Used by the agent to inform the manager of some events.
SPECIFIC TRAP
0
0
0
0
0
ES-2108 Series User's Guide
DESCRIPTION
This trap is sent when the switch is turned on.
This trap is sent when the switch restarts.
This trap is sent when the Ethernet link is down.
This trap is sent when the Ethernet link is up.
This trap is sent when an SNMP request comes from
non-authenticated hosts.
125