Frame-Type; Egress Set; Figure 123 Gvrp Command Example; Figure 124 Frame-Type Command Example - ZyXEL Communications ES-2108 User Manual

ES-2108 Series User's Guide

Figure 123 gvrp Command Example

ras(config)# vlan1q gvrp
ras(config)# interface port-channel 1,3-5
ras(config-interface)# gvrp

28.10.6 frame-type

Syntax:
where
<all|tagged>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Enable tagged frame-types on the interface.

Figure 124 frame-type Command Example

ras(config-vlan1q)# ingress-check
ras(config)# interface port-channel 1,3-5
ras(config-interface)# frame-type tagged

28.10.7 egress set

Syntax:
where
<port-list>
An example is shown next.
• Enable port-based VLAN tagging on the switch.
• Enable ports one, three, four and five for configuration.
• Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
184
frame-type <all|tagged>
Choose to accept both tagged and untagged incoming frames or just tagged
incoming frames on a port.
egress set <port-list>
Sets the outgoing traffic port list for a port-based VLAN.
Chapter 28 Command Examples