ZyXEL Communications ES-2108 User Manual page 163

Table 58 Command Summary: Configuration Mode (continued)
COMMAND
snmp-server
spanning-tree
ssh
storm-control
timesync
trunk
vlan
vlan1q
password
port-access-
authenticator
Chapter 27 Introducing the Commands
https
icmp
snmp
ssh
telnet
trap-destination
<ip>
<port-list>
key <rsa1|rsa|dsa>
known-hosts
known-hosts <host-
ip>
known-hosts <host-
ip> [1024|ssh-
rsa|ssh-dsa]
<T1|T2>
<T1|T2> interface
<port-list>
<T1|T2> lacp
<vlan-id>
gvrp
ingress-check
port-isolation
ES-2108 Series User's Guide
DESCRIPTION
Disables secure web browser
access to the switch.
Disables ICMP access to the
switch such as pinging and
tracerouting.
Disables SNMP management.
Disables SSH (Secure Shell)
server access to the switch.
Disables telnet access to the
switch.
Disables sending of SNMP
traps to a station.
Disables STP.
Disables STP on listed ports.
Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
Removes all remote hosts.
Removes the specified remote
hosts from the list of all known
hosts.
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
Disables broadcast storm
control.
Disables timeserver settings.
Disables the specified trunk
group.
Removes ports from the
specified trunk group.
Disables LACP in the specified
trunk group.
Deletes the static VLAN entry.
Disables GVRP on the switch.
Disables VLAN tag checking on
incoming traffic.
Disables port isolation.
Change the password for
Enable mode.
Enables 802.1x authentication
on the switch.
163