ZyXEL Communications ES-2108 User Manual page 169

Table 60 Command Summary: config-vlan Commands (continued)
COMMAND
name <name-str>
no
normal <port-
list>
untagged <port-
list>
Chapter 27 Introducing the Commands
default-gateway
<ip-address>
default-
management dhcp-
bootp
default-
management <ip-
address> <mask>
default-
management dhcp-
bootp release
default-
management dhcp-
bootp renew
fixed <port-list>
forbidden <port-
list>
inactive
ip address <ip-
address> <mask>
ip address
default-gateway
ip address
default-
management dhcp-
bootp
untagged <port-
list>
ES-2108 Series User's Guide
DESCRIPTION
Sets a default gateway IP address for
this VLAN.
Sets the dynamic in-band IP address
Sets a static in-band IP address and
subnet mask.
Releases the dynamic in-band IP
address.
Updates the dynamic in-band IP
address.
Specifies a name for identification
purposes.
Sets fixed port(s) to normal port(s).
Sets forbidden port(s) to normal
port(s).
Enables the specified VLAN.
Deletes the IP address and subnet
mask from this VLAN.
Deletes the default gateway from this
VLAN.
Sets the default in-band interface to
use a static IP address in this VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
Enables VLAN tagging for outgoing
traffic on the specified port(s).
Specifies the port(s) to dynamically
join this VLAN group using GVRP
Specifies the port(s) you don't want to
tag all outgoing frames transmitted
with this VLAN Group ID.
169