Adjusting The Volume; Using Function Keys; Changing The Zone; Changing The Ch/Gid - Kenwood TK-2170 Series Function Reference

2.2

Adjusting the Volume

The volume level is increased when the Volume control
is turned clockwise and the level is decreased when the
Volume control is turned counterclockwise.
2.3

Using Function Keys

Press a key to activate the function assigned to each
function key. (Refer to 8 Key Assignment on page 29.)
2.4

Changing the Zone

The Zone number can be changed by using the Selector,
Zone Up or Zone Down key.
Assignment on page 29.)
Although the transceiver pauses scanning if the zone is
changed during the scan, the transceiver resumes
scanning after 1 second.
(Refer to 21 Scan on page 105.)
The transceiver skips unprogrammed zones if the zone is
changed.
The Rollover Tone sounds if the smallest zone number is
selected. (Refer to 4.1 Tone Pattern on page 19.)
Transceiver Operation
Using the Selector
• Turn the Selector clockwise.
The zone number increments in steps of 1.
•
Turn the Selector counterclockwise.
The zone number decrements in steps of 1.
Using the PF keys
•
Press the Zone Up key.
The zone number increments in steps of 1.
•
Press and hold the Zone Up key for more than
1 second.
The zone number keeps incrementing in steps
of 1 every 200 ms.
• Press the Zone Down key.
The zone number decrements in steps of 1.
•
Press and hold the Zone Down key for more
than 1 second.
The zone number keeps decrementing in steps
of 1 every 200 ms.
FUNC (K)/Ver. 1.01
(Refer to 8 Key
Confidential
Configuration using KPG-101D
• Assigning functions to the Selector and PF keys
(Refer to FPRG 6.8 Key Assignment.)
2.5

Changing the CH/GID

CH/GID can be changed using the Selector, CH/GID Up
or CH/GID Down key. (Refer to 8 Key Assignment on
page 29.)
Although the transceiver pauses scanning if the
CH/GID is changed during the scan, the transceiver
resumes scanning after 1 second.
page 105.)
The transceiver skips unprogrammed CH/GID numbers if
the CH/GID number is changed.
The Rollover Tone sounds if the smallest CH/GID is
selected. (Refer to 4.1 Tone Pattern on page 19.)
Transceiver Operation
Using the Selector
• Turn the Selector clockwise.
The CH/GID number increments in steps of 1.
• Turn the Selector counterclockwise.
The CH/GID number decrements in steps of 1.
Using the PF keys
• Press the CH/GID Up key.
The CH/GID number increments in steps of 1.
• Press and hold the CH/GID Up key for more
than 1 second.
The CH/GID number keeps incrementing in
steps of 1 every 200 ms.
• Press the CH/GID Down key.
The CH/GID number decrements in steps of 1.
• Press and hold the CH/GID Down key for more
than 1 second.
The CH/GID number keeps decrementing in
steps of 1 every 200 ms.
Configuration using KPG-101D
• Assigning functions to the Selector and PF keys
(Refer to FPRG 6.8 Key Assignment.)
2 BASIC OPERATION
(Refer to 21 Scan on
Contents Index
9