Kenwood TK-2170 Series Function Reference page 42

8 KEY ASSIGNMENT
Function Name
When the Home CH/GID key is
pressed, the transceiver jumps to the
Home CH/GID
configured Home CH/GID.
Home CH/GID on page 10.)
When the Key Lock key is pressed, Key
Key Lock Lock can be enabled or disabled.
to 1.9 Key Lock on page 5.)
When the Lamp key is pressed, the
Lamp backlight LED lights.
on page 14.)
When the Low Transmit Power key is
Low Transmit Power pressed, the transmit power can be
changed (High or Low).
When the Monitor key is pressed, the
Monitor QT/DQT or Optional Signaling is reset.
(Refer to 16.5 Monitor on page 57.)
When the Monitor Momentary key is
pressed and held, the QT/DQT or
Monitor Momentary
Optional Signaling is reset.
(Refer to 16.5 Monitor on page 57.)
When the OST key is pressed, OST can
be enabled or disabled. When the OST
key is pressed and held, the Encode/
OST
Decode pair can be selected from the
OST List.
60.)
When the Scan key is pressed, the
Scan transceiver starts or stops scanning.
(Refer to 21 Scan on page 105.)
When the Scan Delete/Add key is
pressed, the Zone-CH/GID can be
Scan Delete/Add added to or removed from the Scan List.
(Refer to 21.6.1 Scan Delete/Add on
page 110.)
When the Scrambler key is pressed,
the Voice Scrambler function is enabled
Scrambler
or disabled.
Scrambler on page 124.)
The transceiver can make a Selcall
when the Selcall key is pressed and the
Selcall Fleet or ID number is directly entered.
(Refer to 20.2 Selcall Function on page
82.)
The transceiver can make a Selcall and
send a Status Message when the
Selcall + Status key is pressed and the
Selcall + Status
Fleet or ID number and Status number
are directly entered.
Selcall Function on page 82.)
When the Squelch Level key is
pressed, the transceiver enters the
Squelch Level mode allowing a user to change the
Squelch Level.
Level on page 3.)
When the Squelch Off key is pressed,
the transceiver unmutes and received
Squelch Off
audio can be heard.
Squelch Off on page 58.)
30
Index Contents
Description
(Refer to 2.7
(Refer
(Refer to 3.3 Lamp
(Refer to 17 OST on page
(Refer to 26 Voice
(Refer to 20.2
(Refer to 1.6 Squelch
(Refer to 16.6
Confidential
Function Name
When the Squelch Off Momentary key
is pressed and held, the transceiver
Squelch Off
unmutes and received audio can be
Momentary
heard. (Refer to 16.6 Squelch Off on
page 58.)
When the Status key is pressed, the
Status number can be entered directly
Status and the transceiver can send a Status
Message.
Message Function on page 86.)
When the Talk Around key is pressed,
the Talk Around function is enabled or
Talk Around
disabled.
page 34.)
When the Telephone Disconnect key
Telephone
is pressed, the phone line is
Disconnect
disconnected.
(TK-3173 only)
Interconnect on page 51.)
When the Transceiver Password key is
pressed, the functions of the transceiver
Transceiver are restricted and the transceiver enters
Password Password Entry Mode.
(Refer to 5.1 Transceiver Password on
page 24.)
When the VOX key is pressed, the
transceiver enters the mode allowing a
user to configure the VOX Gain Level.
VOX
When the VOX key is pressed and held,
VOX is enabled or disabled.
25 VOX on page 122.)
When the Zone Down key is pressed, the
zone number decrements in steps of 1.
The zone is decremented in steps of 1
Zone Down every 200 ms if the Zone Down key is
pressed or held for more than 1 second.
(Refer to 2.4 Changing the Zone on
page 9.)
When the Zone Up key is pressed, the
zone number increments in steps of 1.
The zone is incremented in steps of 1
Zone Up every 200 ms if the Zone Up key is
pressed or held for more than 1 second.
(Refer to 2.4 Changing the Zone on
page 9.)
Description
(Refer to 20.3 Status
(Refer to 11 Talk Around on
(Refer to 15.4 Telephone
(Refer to
FUNC (K)/Ver. 1.01